The air-cooled Porsche 911s with dry sump lubrication were equipped with a larger volume of motor oil compared to the water-cooled variants. The air-cooled models typically had a total oil capacity of around 10-12 quarts, while the water-cooled versions had a smaller oil capacity of around 8-9 quarts. This larger oil capacity in the air-cooled models helped to ensure better cooling and lubrication for the engine, especially during high-performance driving. **

To store a gasoline-powered earth auger, first, make sure the auger is completely cooled down before storing. Next, empty the fuel tank and run the engine until it stops to prevent any fuel from remaining in the system. Clean the auger thoroughly to remove any dirt or debris. Store the auger in a dry and well-ventilated area, away from any sources of heat or moisture. It is also a good idea to cover the auger with a tarp or protective cover to prevent dust and debris from accumulating on it. **

Ali Auger is a jazz singer known for her soulful and captivating performances. She has gained recognition for her unique vocal style and ability to connect with her audience. Auger has performed at various jazz festivals and venues, and her music has been well-received by jazz enthusiasts and critics alike. Her talent and passion for jazz music have made her a respected figure in the jazz community. **

To remove oil paints from textiles, start by gently scraping off any excess paint with a spoon or dull knife. Then, apply a small amount of dish soap or laundry detergent directly to the stained area and gently rub it in. Let it sit for a few minutes, then rinse the area with warm water. If the stain persists, you can try using a pre-treatment stain remover or rubbing alcohol. Finally, launder the textile as usual, but be sure to check the care label for any specific instructions. **

Dry sump lubrication is advantageous for lowered cars because it eliminates the need for an oil pan, which is typically the lowest point of the engine and susceptible to damage from speed bumps, potholes, or other road hazards. By removing the oil pan, the risk of it being damaged is significantly reduced, allowing lowered cars to navigate uneven roads without worrying about oil pan damage. Additionally, dry sump systems provide better oil control and lubrication efficiency, which can be beneficial for high-performance engines often found in lowered cars. **

The choice between furniture oil and furniture polish depends on the specific needs of the furniture. Furniture oil is better for nourishing and protecting wood, as it penetrates the surface to condition and enhance the natural beauty of the wood. On the other hand, furniture polish is better for adding shine and luster to the surface of the furniture, as it contains ingredients that create a protective layer and provide a glossy finish. Ultimately, the best option depends on whether the furniture needs nourishment and protection (furniture oil) or a shiny finish (furniture polish). **

To oil spruce furniture, start by sanding the surface lightly to remove any rough spots. Then, use a clean cloth to apply a thin, even coat of wood oil, such as linseed oil or tung oil, to the furniture. Allow the oil to penetrate the wood for about 15-20 minutes, then wipe off any excess with a clean cloth. Let the furniture dry completely before applying a second coat if needed. This will help to nourish and protect the wood, giving it a beautiful, natural finish. **

In 7 Days to Die, you can craft an Auger by first obtaining the Auger Schematic, which can be found in loot or purchased from traders. Once you have the schematic, you will need to gather the necessary materials, including mechanical parts, forged steel, and an engine. You can find these materials by looting buildings, cars, and other containers. Once you have all the required materials, you can craft the Auger at a workbench using the schematic. Keep in mind that crafting an Auger requires a high level of the Advanced Engineering skill. **